EPEVER Photo voltaic Demand CONTROLLER Set up: TRACER AN Collection CONTROLLE

EPEVER Photo voltaic Demand CONTROLLER Set up: TRACER AN Collection CONTROLLE

Blog Article

The EPEVER Tracer AN Series Solar Cost Controller is really a remarkably efficient solar controller made for off-grid solar techniques. Dependant on multiphase synchronous rectification engineering, it assures optimized Strength conversion and process steadiness for a variety of photovoltaic (PV) purposes.

Key Attributes from the EPEVER Tracer AN Series Controller
The Tracer AN series utilizes EPEVER Photo voltaic Demand Controller technologies for outstanding solar Vitality harvesting. Essential characteristics include things like:

Multiphase Synchronous Rectification (MSR) for enhanced Electricity conversion.
Highly developed MPPT Algorithm with >ninety nine% performance.
Twin-Phase Charging for Improved battery daily life.
Liquid crystal display Show with actual-time info monitoring.
Several Load Handle Modes which includes guide and timer.
Extensive Electronic Protections against overcharging, over-discharging, short circuits, and reverse polarity.
Action-by-Phase Information to Putting together the EPEVER Tracer AN Sequence Controller
1. Unboxing and Getting ready the Controller
Make sure all elements are provided: Tracer AN unit, temperature sensor, communication cables, and user handbook.
Validate the design variety and voltage rankings match your solar panel and battery specifications.
2. Mounting the Demand Controller
Pick out a nicely-ventilated, dry place close to the battery bank.
Secure the Tracer AN controller using the provided mounting brackets.
Maintain good clearance for warmth dissipation.
3. Wiring the Photo voltaic Cost Controller
Caution: Usually follow good protection protocols and make sure the method is driven off ahead of connecting elements.

Step one: Hook up the battery terminals for the charge controller (favourable to beneficial, damaging to unfavorable).
Action 2: Connect the photo voltaic panel array for the PV input terminals.
Action 3: Connect the load terminals if employing a direct load connection.
Action 4: Double-check all connections for polarity and tightness.
four. Configuring the Controller Settings
Power to the controller by connecting the battery 1st.
Use the Liquid crystal display Screen to navigate the settings menu.
Configure:
Battery Style: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Management Modes: Manual, timer, light-weight Management.
5. Checking and Facts Logging
The Tracer AN Sequence supports real-time checking using the MT50 distant meter.
Facts might be logged via the RS485 interaction Read more port making use of software for instance Solar Station PC.
Distant monitoring is achievable With all the EPEVER WiFi module.
six. Troubleshooting Widespread Problems
Difficulty 1: No Ability Output

Check out battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Situation 2: In excess of-Voltage Defense

Confirm the photo voltaic array’s voltage rating.
Change method parameters if important.
Problem three: No Battery Charging

Inspect PV wiring for continuity.
Verify MPPT configurations within the menu.
Great things about the Tracer AN Series with MSR Know-how
The multiphase synchronous rectification technological innovation ensures:

Increased Efficiency: Diminished Electrical power losses for the duration of conversion.
Increased Dependability: Secure overall performance underneath variable hundreds.
For a longer time Battery Everyday living: Constant and precise charging profiles.
Conclusion
The EPEVER Photo voltaic Demand Controller with multiphase synchronous rectification technologies is really an Outstanding choice for optimizing solar energy generation and lengthening battery everyday living. By subsequent the above mentioned set up guide, end users can be certain highest performance and method longevity.